This item is a 3D printed version of the YT-2400 Outrider from the Star Wars Shadows of the Empire video game. It is not 100% game accurate. This is a kit item, meaning that you will receive the parts straight off of the 3D printer, and will have to assemble and do all of the finishing touches yourself.
DO NOT put PLA printed models in the sun or they will warp or even melt. Even if painted.
The kit is printed in light grey pla filament.
--TERMS--
3D printed props and prop kits are sold with a zero return, zero refund policy. 3d printed items, even finished items, will have small imperfections, period. Photos show you exactly what you're getting and please understand that while fairly durable, these props are meant as display items, and can be scratched or broken if mishandled. Any 3d works that require attribution by license are shipped with a small tag, naming the original designer.
Kits may come in colors other than what is pictured. They are printed using whatever color filament I have on hand but most of the time I only print in grey or light grey.
Also I recommend using a good 2 in 1 filler and primer in very light coats and then wet sanding with fine grip sandpaper and repeat until you get the smooth finish you want.
This model needed support to print in several areas and will be rough in those areas. I recommend light sanding with various grit paper.
I made huge upgrades to the yt-2400 model, those upgrades include resizing the cockpit smaller to better scale with the original source material, added landing gear, completely remade the turret wells and made them much smaller and as close as I could to the game, made the guns smaller and mounted more like the millennium falcons, and made it a lot more detailed with greeble walls, vents and engine detail.. The details are not game accurate.
It comes with the 2 body hull pieces, 1 cockpit ( cockpit slots into 2 pegs that are pre glued into the hull), 3 alignment pins,
5 landing gear (2 tallest are for the front, 2 smallest are for the rear and the middle is for the cockpit), 2 guns for top and bottom (guns do not rotate side to side only up & down they will come preassembled),
4 side wall greebles (they were printed without support and have some drooping) 2 large greeble pieces for the top and bottom of the ship, 4 pipes for the top & bottom greebles, (the pipes will need to be glued on, please look at the 1st and last 2 pics for placement),
1 docking port, 3 exhaust vents, (vents are slotted & only go on one way, just rotate the vent until it slots), 3 greeble walls for the back and interior sides,
and lastly the engine grill.
This ship is intended to be in 1/72nd, in scale with Fine Molds & Bandai's 1/72nd Millennium Falcon, Fine Molds is in the picture.
It is printed in PLA at 0.2mm layer height.
The bandai 1/72 figure, the fine molds millennium falcon and the painted yt-2400 model are not included, the figure and ship is used for scale and the painted yt-2400 is my personal build.