Combined shipping is automatic on all items The Sega Game Gear is a great retro handheld. One of the first color screen handhelds of its time to include a built in backlight and a variety of original games and the ability to play Sega Master System games. The Achilles heel of this system are it's electrolytic capacitors. With a slew of poor quality capacitors on the market at the time, thousands of Game Gears were manufactured with faulty components. When a capacitor dies it typically shuts down the entire device, allowing you to power on for a second or two, if at all, before powering down. They are also very prone to leaking. The fluid inside a capacitor is corrosive and will corrode everything it touches if left unattended long enough. Forthissolepurposeitishighlyrecommendyoureplacethecapacitorsinyour Sega GameGear.Capacitor Kits Model 2110 Model 2110K VA4 Model 2110G VA5/Majesco Kits fix a variety of issues to include, but not limited to:
No power
Dim screen
Black lines on screen
No sound
Poor sound
Notes: Kits may not require all included capacitors Ceramic capacitors bags come labeled with uf/v ratings Sound board bags may contain electrolytic or ceramic capacitors All capacitors match original capacitor uf specs and either match or exceed voltage ratings TVTunerCapacitorKit MK-2101-05 England MK-2101-18 Germany MK-2101-20 General Europe (USA) Notes:
All models will not require all 11 capacitors.
Due to the outdated nature of the device, it's normal to receive static audio/video when powered on.
For a neat novelty connect a 3.5mm to A/V splitter cable to play modern gaming systems using your Sega Game Gear as a display.
PSU Capacitor Kit
Replaces single capacitor in original power supply units
Compatible with Model 2103 & 2103-1
TVTunerReplacementAntenna(NoSwivelMount)
Replaces original damaged antenna
Slightly thinner and longer than original
Hinders proper fit in original packaging/cases
Power BoardTransistor Kit
Perfect for replacing shorted, blown or capacitor corroded transistors
Kit is compatible with
all
power board models
2 kits required to replace ZQ/ZP transistors on VA4 power board
Compatible transistors:
ZQ/ZP
L5/L6/L7
M5/M6/M7
Kitincludes : M5-7 x1 Location: Q1 Model 2110/2110G VA5/Majesco L5-7 x1 Location: Q2 Model 2110/2110G VA5/Majesco (Q4 on Model 2110K VA4 ) ZQ x1 Location: Q3 Model 2110/2110G VA5/Majesco (Q1/2 on Model 2110K VA4 ) Model2110 Main Board VA0/VA1TransistorKit
Perfect for replacing shorted, blown or capacitor fluid corroded transistors
Kit covers all transistors on main board for
Model 2110
single/doubleASIC systemsXL
transistors also found on
Model 2110G VA5/MajescoCompatible transistors:
XL
L5/L6/L7
M5/M6/M7
Kitincludes: XL x2 Location : Q3/4 (Q12/13 Model 2110G/Majesco VA5 ) L5-7 x6 Location: Q1/5/6/7/9/11 Note: Q1 only on double ASIC M5-7 x2 Location: Q8/10 Model 2110 Main Board VA0/VA1 Diode Kit Perfect for replacing shorted, blown or capacitor fluid corroded diodes
Kit covers all diodes on main board for
Model 2110
VA0/VA1
double/singleASIC systems
Also found on
Model 2110K VA4/2110G VA5/MajescoCompatible diode:
B3
Location: D1/2/3/4 Main Board Model 2110 (D1/6/7 Main Board/D5 Power Board Model 2110K ) (D1/6 Main Board Model 2110G ) Model 2110 (VA0/VA1) Replacement Headers
Drop in replacement headers for the power and sound board
Unneeded pins already removed
Excluding speaker connector
,
NOT
compatible with model
2110K VA4/2110G VA5/Majesco Sound Board IC + Socket
Replaces faulty IC chip found on
all
sound board models
Fixes distorted audio output (Typically found at the higher end of the volume spectrum)
Socket included for effortless future replacement
Additional height does not hinder system closure
Volume Wheel(Potentiometer)
Compatible with
all
Sega Game Gear/Majesco sound board models
Fixes scratchy volume distortion when rotating OEM wheel
Matches pin layout and ohm resistance of OEM potentiometer
Thickness of wheel is slightly thinner (1.87mm) compared to OEM (2.91mm)
Also compatible with Nintendo Gameboy DMG-01
ReplacementSpeaker
Compatible with all models
Simply desolder the wires from your OEM speaker and resolder them to the same solder points on your new speaker
Also compatible with Nintendo Gameboy DMG-01
Replacement Headphone Jack
Compatible with all Sega Game Gear/Majesco sound board models
Matches pin layout of original headphone jack
Also compatible with Sega Game Gear TV Tuner Also compatible with NEC Turbo Express Replacement DC Jack (Center Pin Positive) + Adhesive Strip
Compatible with all USA model Sega Game Gear power boards
Replaces damaged OEM DC jack
Can be wired in reverse polarity to make Europen Game Gear power board compatible with USA power supply
DC Jack does not match through hole layout on Game Gear power board and
requires jumper wires and surface mounting
Includes a piece of double sided adhesive to allow for mounting on top of the power board in the same location
Jack will wiggle slightly when inserting power cable but is surprisingly sturdy with the whole system closed and the jack resting within its shell cutout
Also compatible with the following systems:
Genesis 2/3
Mega Drive
CDX
Nomad
PS2 Slim
Replacement PSU Right Angle Plug
Fixes faulty internal connections on power supply units
Compatible with
all
Sega Game Gear power supplies and batteries
Can be used to convert 3rd party charger (9V 1A) to be compatible with Sega Game Gear
BennVenn Helper Board
Ultra thin for simple installation
Eliminates the tedious task of soldering wires directly to the screen rail pads which requires consistently counting pins to verify correct placement
Simply align SMS (Pin 42 on the cartridge slot) and screen rail pads. Solder into place and solder your wires to their corresponding solder pads on the helper board
Compatible with ALL available screen mod kits
Follow official install instructions for brightness control
BennVenn GGHD Video Out OSD Function Kit TTP223 touch switch 1.25mm 3 pin micro JST male + female cable (100mm) Notes: If you're installing the TTP223 switch into an original shell, you MUST scrape away the EMI paint where you want the switch to be placed. It must be bare plastic otherwise the touch sensor will not register your finger press. You only need to scrape away an area large enough for the touch circle. Original shells have either a brown or gold paint interior. 3rd party shells will not require this step.Tips: When soldering the 3 wires to your TTP223 switch, cover the touch side with a piece of kapton tape to keep the through holes as flat as possible. Use a micro JST 3 pin male to female cable for the TTP223 switch to prevent having to desolder or removing the switch should disassembly be required in the future. Tape the connectors within the shell to prevent unnecessary rattling of the cable. Use double sided tape to adhere the TTP223 switch to the shell interior. Firmware update below: https://discord.com/channels/761864233855615017/928843768399032330/1106039697056219156 __________________________________________________ FORDETAILEDDISASSEMBLYINSTRUCTIONSSEELINKS:SegaGameGear https://www.ifixit.com/Guide/Sega+Game+Gear+Capacitor+Replacement/113655 SegaGameGearTVTuner https://www.ifixit.com/Guide/Sega+Game+Gear+TV+Tuner+Disassembly/125488 Interestedinrefurbishedsystems?Seelink: https://www.Pricetronic.com/itm/283661640499 Needcapacitors/parts?Seemyotherlistings!
Returns Accepted for this item if it's within 30 Days