Product description:
3D Technology: FDM
Max Traveling Speed:180mm/s
Filament:1.75mm PLA
Layer Thickness:0.1-0.4mm
Nozzle diameter:0.4mm
Precision:±0.1mm
Input:AC 100-265V 50-60Hz
Output:DC 24V 15A 360W
Max Nozzle Temperature:255℃
Max Hot bed Temperature:110℃
Printing Size:220*220*250mm
Machine Size:440*410*465mm
Package weight:8.6kg
File Format: STL, OBJ, G-Code
Working Mode: Online or SD offline
Title Other Resin K1 Series DIY Fdm Printer Laser Engraver 3D Printer Accessories 3D Printer Filament Lcd Printer 3D Scanner
Creality Ender 3 3D Printer Fully Open Source w/ Resume Printing FDM DIY Printer Creality Ender 3 3D Printer The Ender 3 is an Open Source Printer Certified by the Open Source Hardware Association. All hardware CAD files, board schematics, and firmware files are available and update on the GitHub page Key Features: One-piece structure, Super printing size 220*220*250mm. Comes with several assembled parts, simple assembly, only 120 minutes for 3D printer beginners before the first printing. Big hand twist nut, easier to level. Safety protected Power supply, reach 110℃ for hotbed in about 5 minutes. The resume printing function can resume prints even after a power outage or lapse occurs. Removable Build Plate to replace reprinting tape and glue, solve warping problem. V1.1.4 Standard Version motherboard comes with thermal runaway protection Note : the board is only the Standard Version, Not-Silent Product description: 3D Technology: FDM Max Traveling Speed:180mm/s Filament:1.75mm PLA Layer Thickness:0.1-0.4mm Nozzle diameter:0.4mm Precision:±0.1mm Input:AC 100-265V 50-60Hz Output:DC 24V 15A 360W Max Nozzle Temperature:255℃ Max Hot bed Temperature:110℃ Printing Size:220*220*250mm Machine Size:440*410*465mm Package weight:8.6kg File Format: STL, OBJ, G-Code Working Mode: Online or SD offline Package content: Creality Ender 3 3D printer FAQ Filament does not stick on the hotbed? For newcomers, this is the most common problem. Do not worry, you can solve it easily. Generally, the distance between the nozzle and platform is too far or near. So rotary the knob under the platform to adjust the distance between the nozzle and platform again, at a piece of A4 paper distance or less). The display shows "Min temp"? This happens for the following reasons: 1. Thermistor port of nozzle is not plugged into the motherboard above or poor contact; 2. The Thermistor port of the nozzle is broken, you need to replace the spare thermistor. The display shows "MAX temp"? This happens for the following reasons: 1.Thermistor port of nozzle screw is locked tightly, cause the temperature can not be sensing; 2.Thermistor port of the nozzle is broken, you need to replace the spare thermistor. Axis movement is not normal? Please check axis lines and limit lines whether the one-to-one correspondence, whether loose. When you check the extruder motor, you must preheat the nozzle over 185℃. Circles not round, Lines not touching? If the X/Y belt is loose, you can find circles that are not round, Lines not touching when printing. Tighten all belts as far as possible. How to level Creality Creality Ender 3? Move the nozzle so that it’s positioned over the left corner of the bed. A half-inch or so from both sides is a good location. Slide the paper between the nozzle and the bed. If it doesn’t fit, drop the corner until it does. Once the paper is able to slide under the nozzle, very slowly raise the corner with the adjuster. Remember: Clockwise moves the bed up. As you do this, gently slide the paper back and forth. The moment you feel even the slightest resistance to your moving the paper, stop turning the knob. That corner is (almost) ready to go. Do the same for the other three corners of the build plate. Always advance the hot end to a new corner slowly. This will prevent damage to the build plate in case the nozzle starts to drag. If this occurs, simply lower the next corner (before starting the leveling process) to make some room. After you’ve adjusted each corner once, go back and check the four corners again. You may have to do further adjustments to get all four correct. Does Creality Ender 3 need to be assembled all by itself? No, Ender 3 is a semi-assembly machine. You can refer to our packing instructions for assembly. Its installation is quite simple. How long will it take to install Creality Ender 3? The specific installation time depends on the user's familiarity with the product. If you are familiar with the product and can fully understand the installation instructions, it will take about 30 minutes. If you don't know much about a 3D printer, it takes about two or three hours. What filament does Creality Ender 3 use for printing? PLA,PETG,ABS Creality ender 3 how to change filament? Step 1: Adjust the nozzle temperature to the consumable melting temperature and remove the consumables to be replaced. Step 2: Push the new filament along until you feel firm resistance. This means it has reached the nozzle. Step 1: Set the heating temperature, eliminate old consumables, and make new prints. Model Ender-3 Ender 3 S1 Ender-3 S1 Pro Ender-3 S1 Plus Ender-3 V3 SE Printing Technology FDM FDM FDM FDM FDM Build Volume 220x220x250mm 220×220×270mm 220 x 220 x 270 mm 300*300*300mm 220*220*250mm Product Dimensions 440*410*465mm 487x453x622mm 490 x 455 x 625 mm 557x535x655mm 400x366x490mm Net Weight 6.7kg 9.1kg 8.7 kg 10.25kg 7.34kg Goss Weight 8kg 11.2kg 11.1kg 13.4kg 9.18kg Leveling Mode N/A CR Touch Auto-leveling CR Touch Auto-leveling CR Touch Auto-leveling CR Touch Auto-leveling Printing Precison ±0.1 mm ±0.1 mm ±0.1 mm ±0.1 mm ±0.1 mm Motherboard Silent Motherboard 32-bit Silent Mainboard 32-bit Silent Mainboard 32-bit Silent Mainboard 32-bit Silent Mainboard Printing Speed 100mm/s 150mm/s 150mm/s 150mm/s 180mm/s Nozzle Diameter Standard 0.4mm(can be changed to 0.3/0.2mm) 0.4mm Standard 0.4mm(Custom Options: 0.3/0.2 /0.5/0.6/0.8/1.00/1.2MM)) Standard 0.4mm(can be changed to 0.3/0.2/0.5/0.6/0.8/1.0mm) 0.4 mm (standard) Supported Filament 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient PLA/TPU/PETG/ABS PLA,ABS,WOOD,TPU,PETG,PA 1.75mm PLA, ABS, TPU, Copper, Wood, Carbon Fiber, Gradient PLA, PETG, TPU(95A) Display N/A 4.3" Color Knob Screen 4.3-inch touch screen 4.3-inch touch screen 3.2'' Color Knob Screen File Format STL,OBJ,G-Code STL/OBJ/AMF STL/OBJ/AMF STL/OBJ/G-Code STL, OBJ, 3MF, AMF Rated Voltage 110-220V 100-120V~, 200-240V~, 50/60Hz 100-120V~, 200-240V~, 50/60Hz 100-120V~, 200-240V~, 50/60Hz 100-120V~, 200-240V~, 50/60Hz Slice Software Cura/Repetier-Host Creality Slicer/Cura/Repetier-Host/Simplify3D Creality Slicer/Cura/Repetier-Host/Simplify3D Cura/Repetier-Host Creality Print, Cura 5.0 or Newer Version, Simplify3D Resume Printing Yes Yes Yes Yes Yes Data Transmission Method SD Card Type-C/SD Card Type-C USB/SD Card Type-C/SD Card Type-C/SD Card Supported Language English Chinese/English Chinese/English /Español Deutsche/ Français Pусский/ Português Italiano/ Türk Chinese/English /Español Deutsche/ Français Pусский/ Português Italiano/ Türk English, French, Portuguese, Turkish, German, Spanish, Italian, Russian, Japanese, Chinese Extruder MK8 Extruder "Sprite" full-metal dual-gear direct extruder "Sprite" full-metal dual-gear direct extruder with 1:3.5 gearing "Sprite" full-metal dual-gear direct extruder "Sprite" Direct Extruder Payment Delivery Terms of sales About us Contact us Payment We accept payment via Payoneer. Please accomplish payment within 5 business days after you won the item. Delivery All your orders will be shipped within 1-2 business days and updated tracking info. Please make sure your address is full and correct, so that your order will be soon shipped and delivered smoothly. Most orders will adopt standard shipping, which usually needs 3-5 biz days. Any PO BOX addresses need to be confirmed if delivery or not. Terms of sales 1-month-returning for all orders after they are proved defective/damaged/faulty (videos or photos about it are preferred). Address on the package is not the return address, please email us firstly to get the correct return address. About us * Founded in 2014 by four 3D printing enthusiasts, Creality is a top global manufacturer of 3D printers. Our range of products includes FDM and resin 3D printers, 3D scanners, laser engravers, and filaments. Currently we host four brands of 3D printers: Creality as the master brand, and the three sub-brands of Ender, HALOT and Sermoon. Capitalizing on our innovatively leading technologies and products, we also offer consumer and professional printing solutions for makers, designers, schools and enterprises. Contact us Customer Service Hours: 9:00AM - 18:00PM BST (Beijing Standard Time) . You can also contact our official website customer support.
Returns Accepted for this item if it's within 30 Days