USA
LOCATED
FREE
SHIPPING
SHIP
SAME DAY
3in Smith Gun scale plastic model kit, Inch Mk I OSB Gun ACE 72569 1/72 Manufacturer:
ACE Models (Ukraine) Code:
72569 Scale:
1/72 Material:
Plastic Paint:
Unpainted, Unassembled, Kit do not contain paints and glue. Condition:
New in Box
In the early days of World War II, things were not going well for Great Britain. The island state, for the first time in many years, was left alone with the enemy armies of Hitler, separated from them only by a sea channel. The Germans had tanks, and the British had several anti-tank guns. This state of affairs gave rise to the introduction of the Smith Gun.
Retired Army Major William H. Smith, then a boiler worker, plans for a cannon of his own design. Based on a 76.2mm smoothbore tube that was 4.5 feet long (1.37 meters), the Smith Cannon looked like a mix of a stroller and a hot dog kiosk. For movement, she had two large wheels with rubber tires glued to them. The 270-kilogram ingenious design, pneumatics, springs, shock absorbers and supports, rumbled and wobbled along the street while it was slowly pushed or pulled by hand. The barrel of the gun was secured, while the braces mounted on the axle of the wheels allowed it to move from side to side. To fire a shot, the whole thing fell on one side of the wheel disk, and the calculation was crowded behind and released one or two shells. In order not to confuse the calculation - on which side to overwhelm the tool - one (support) wheel was made with a cone inward, and the second (upper) cone outward.
The gun could fire a standard, low-impulse 8-pounder mine, which was used in army mortars. The ammunition has been modified for smoothbore firing, with a trigger made from motorcycle clutch traction. Just like the Smith Cannon itself, the ammunition was experienced and was made in a hurry, which entailed frequent detonation even in the barrel of the gun, when the thrust was compressed. Such a projectile pierced a brick wall at a distance of 180 meters, to defeat a tank with 80-mm steel rolled armor, the gun had to be only 45 meters away from it.
Only 5 shells were transported with the gun. The rest, in the amount of 21 pieces, were transported on a separate front end. The complete set includes:
1 frame with details
scheme for coloring the model
step-by-step instruction
BUY NOW!
Shipping
Returns Shipping Returns We offer FREE shipping on all orders! We ship SAME DAY! Your item is located in the USA . Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 days after dispatch. In some rare cases handling time could be expanded. If this happens - sorry for that. Sorry, we can't ship to P.O. boxes and US Protectorates. !!! IF YOU HAVE ANY PROBLEM WITH YOUR ORDER, CONTACT US FIRST In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. Sorry, but currently, we do not accept any kind of returns . Please take this to attention before purchase. We are working to resolve this issue. If you have any problem with your order, please contact us.
Made in Ukraine
Free Shipping
Customer Support Manufacturer: ACE Models (Ukraine) Code: 72569 Scale: 1/72 Material: Plastic Paint: Unpainted, Unassembled, Kit do not contain paints and glue. Condition: New in Box In the early days of World War II, things were not going well for Great Britain. The island state, for the first time in many years, was left alone with the enemy armies of Hitler, separated from them only by a sea channel. The Germans had tanks, and the British had several anti-tank guns. This state of affairs gave rise to the introduction of the Smith Gun. Retired Army Major William H. Smith, then a boiler worker, plans for a cannon of his own design. Based on a 76.2mm smoothbore tube that was 4.5 feet long (1.37 meters), the Smith Cannon looked like a mix of a stroller and a hot dog kiosk. For movement, she had two large wheels with rubber tires glued to them. The 270-kilogram ingenious design, pneumatics, springs, shock absorbers and supports, rumbled and wobbled along the street while it was slowly pushed or pulled by hand. The barrel of the gun was secured, while the braces mounted on the axle of the wheels allowed it to move from side to side. To fire a shot, the whole thing fell on one side of the wheel disk, and the calculation was crowded behind and released one or two shells. In order not to confuse the calculation - on which side to overwhelm the tool - one (support) wheel was made with a cone inward, and the second (upper) cone outward. The gun could fire a standard, low-impulse 8-pounder mine, which was used in army mortars. The ammunition has been modified for smoothbore firing, with a trigger made from motorcycle clutch traction. Just like the Smith Cannon itself, the ammunition was experienced and was made in a hurry, which entailed frequent detonation even in the barrel of the gun, when the thrust was compressed. Such a projectile pierced a brick wall at a distance of 180 meters, to defeat a tank with 80-mm steel rolled armor, the gun had to be only 45 meters away from it. Only 5 shells were transported with the gun. The rest, in the amount of 21 pieces, were transported on a separate front end. The complete set includes: 1 frame with details scheme for coloring the model step-by-step instruction
SAME DAY
FREE
SHIP
SHIPPING
LOCATED
3in Smith Gun scale plastic model kit, Inch Mk I OSB Gun ACE 72569 1/72 Manufacturer:
ACE Models (Ukraine) Code:
72569 Scale:
1/72 Material:
Plastic Paint:
Unpainted, Unassembled, Kit do not contain paints and glue. Condition:
New in Box
In the early days of World War II, things were not going well for Great Britain. The island state, for the first time in many years, was left alone with the enemy armies of Hitler, separated from them only by a sea channel. The Germans had tanks, and the British had several anti-tank guns. This state of affairs gave rise to the introduction of the Smith Gun.
Retired Army Major William H. Smith, then a boiler worker, plans for a cannon of his own design. Based on a 76.2mm smoothbore tube that was 4.5 feet long (1.37 meters), the Smith Cannon looked like a mix of a stroller and a hot dog kiosk. For movement, she had two large wheels with rubber tires glued to them. The 270-kilogram ingenious design, pneumatics, springs, shock absorbers and supports, rumbled and wobbled along the street while it was slowly pushed or pulled by hand. The barrel of the gun was secured, while the braces mounted on the axle of the wheels allowed it to move from side to side. To fire a shot, the whole thing fell on one side of the wheel disk, and the calculation was crowded behind and released one or two shells. In order not to confuse the calculation - on which side to overwhelm the tool - one (support) wheel was made with a cone inward, and the second (upper) cone outward.
The gun could fire a standard, low-impulse 8-pounder mine, which was used in army mortars. The ammunition has been modified for smoothbore firing, with a trigger made from motorcycle clutch traction. Just like the Smith Cannon itself, the ammunition was experienced and was made in a hurry, which entailed frequent detonation even in the barrel of the gun, when the thrust was compressed. Such a projectile pierced a brick wall at a distance of 180 meters, to defeat a tank with 80-mm steel rolled armor, the gun had to be only 45 meters away from it.
Only 5 shells were transported with the gun. The rest, in the amount of 21 pieces, were transported on a separate front end. The complete set includes:
1 frame with details
scheme for coloring the model
step-by-step instruction
BUY NOW! Shipping We offer FREE shipping on all orders! We ship SAME DAY! Your item is located in the USA . Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it within 2-6 days after dispatch. In some rare cases handling time could be expanded. If this happens - sorry for that. Sorry, we can't ship to P.O. boxes and US Protectorates. !!! IF YOU HAVE ANY PROBLEM WITH YOUR ORDER, CONTACT US FIRST In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. Returns Sorry, but currently, we do not accept any kind of returns . Please take this to attention before purchase. We are working to resolve this issue. If you have any problem with your order, please contact us.
Made in Ukraine
Free Shipping
Customer Support Manufacturer:
ACE Models (Ukraine) Code:
72569 Scale:
1/72 Material:
Plastic Paint:
Unpainted, Unassembled, Kit do not contain paints and glue. Condition:
New in Box
In the early days of World War II, things were not going well for Great Britain. The island state, for the first time in many years, was left alone with the enemy armies of Hitler, separated from them only by a sea channel. The Germans had tanks, and the British had several anti-tank guns. This state of affairs gave rise to the introduction of the Smith Gun.
Retired Army Major William H. Smith, then a boiler worker, plans for a cannon of his own design. Based on a 76.2mm smoothbore tube that was 4.5 feet long (1.37 meters), the Smith Cannon looked like a mix of a stroller and a hot dog kiosk. For movement, she had two large wheels with rubber tires glued to them. The 270-kilogram ingenious design, pneumatics, springs, shock absorbers and supports, rumbled and wobbled along the street while it was slowly pushed or pulled by hand. The barrel of the gun was secured, while the braces mounted on the axle of the wheels allowed it to move from side to side. To fire a shot, the whole thing fell on one side of the wheel disk, and the calculation was crowded behind and released one or two shells. In order not to confuse the calculation - on which side to overwhelm the tool - one (support) wheel was made with a cone inward, and the second (upper) cone outward.
The gun could fire a standard, low-impulse 8-pounder mine, which was used in army mortars. The ammunition has been modified for smoothbore firing, with a trigger made from motorcycle clutch traction. Just like the Smith Cannon itself, the ammunition was experienced and was made in a hurry, which entailed frequent detonation even in the barrel of the gun, when the thrust was compressed. Such a projectile pierced a brick wall at a distance of 180 meters, to defeat a tank with 80-mm steel rolled armor, the gun had to be only 45 meters away from it.
Only 5 shells were transported with the gun. The rest, in the amount of 21 pieces, were transported on a separate front end. The complete set includes:
1 frame with details
scheme for coloring the model
step-by-step instruction