1/24 Scale 2022 Silverado Slammed Single Cab W/ Short Bed Model Kit
- 3d Printed
USD $135.00
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Scale Model Addicts Exclusive
UP TO 30 DAYS HANDLING TIME
1/24 Scale 2022 Silverado Slammed Single Cab W/ Short Bed Model Kit - 3D Printed.
This kit is fully 3D Printed. Sanding and general body prep will be required for the best results.
- 66 Piece UNASSEMBLED kit. Unpainted.
- CURBSIDE KIT - Engine NOT included. Hood does NOT open.
- Windshield and Rearview Windows are included as a vacuum formed piece. Must be trimmed out to be installed into the kit. (Not Pictured)
- Headlight plastics also included
- Custom Frame (2 Pieces)
- 4 Link Suspension
- 2 Piece Driveshaft
- Custom Bed Pan Exit Exhaust (2 pc)
- Custom Bed Pan
- Dual Air Compressors + Tank + Air Hard Lines (4 pc)
- Dual Optima Batteries with Hold Downs (4 pc)
- Front Turning Suspension (6 Pc)
- Brembo Brakes (8 Pc)
- 30” Intro Infamous Twisted Wheels (16 Pc)
- Interior (8 Pc)
- Scale Model Addicts Club Plaque (1/24)
-F&R Bumpers, Grille, Side Mirrors, Tail Lights (7 pc)
This Kit was designed by a collaboration of multiple designers. While the kit has a lot of custom design, many modifications can still be made to personalize the kit as you see fit.
The body sits ~1MM from the floor. The stock interior was not modified or raised in any way, but a “Scale Model Addicts” club plaque was also included to mount at the rear view window.
The Bed Pan Exit Exhaust runs through the custom frame, and twists above the differential before exiting through the pan, if you choose to install it.
Beneath the custom bed pan you’ll find the fuel cell, batteries, air compressors and everything else needed to build a nice truck like this.
This full kit is considered a PRINT-TO-ORDER item. Due to this Kit being in the final stages of development, the handling time is 30 days. This will ensure that you receive a high quality kit as well as instructions to build the kit as easily as possible.
Our goal at Scale Model Addicts is to make rare or uncommon model kits available to the public. When we bring out a kit, we make it print-to-order so that we don’t have to limit the amount of kits or the amount of time we can carry it.
The more purchases you make of this kit, the further you are funding the creation of new unique kits for the slammed and lifted community. While we don’t take design requests, we do take suggestions! Throw us some ideas in a message here on eBay or on Instagram @ScaleModelAddicts anytime!
The price of the kit reflects the time and effort it has taken to design this kit, print individually, and provide the best customer experience to all model builders.
Please reach out if you have any questions!
You won’t find this kit anywhere else!
This kit has been made available to order by popular demand. Because this was not planned, the kit is still in Print-To-Order status.
UP TO 30 DAYS HANDLING TIME
1/24 Scale 2022 Silverado Slammed Single Cab W/ Short Bed Model Kit - 3D Printed.
This kit is fully 3D Printed. Sanding and general body prep will be required for the best results.
- 66 Piece UNASSEMBLED kit. Unpainted.
- CURBSIDE KIT - Engine NOT included. Hood does NOT open.
- Windshield and Rearview Windows are included as a vacuum formed piece. Must be trimmed out to be installed into the kit. (Not Pictured)
- Headlight plastics also included
- Custom Frame (2 Pieces)
- 4 Link Suspension
- 2 Piece Driveshaft
- Custom Bed Pan Exit Exhaust (2 pc)
- Custom Bed Pan
- Dual Air Compressors + Tank + Air Hard Lines (4 pc)
- Dual Optima Batteries with Hold Downs (4 pc)
- Front Turning Suspension (6 Pc)
- Brembo Brakes (8 Pc)
- 30” Intro Infamous Twisted Wheels (16 Pc)
- Interior (8 Pc)
- Scale Model Addicts Club Plaque (1/24)
-F&R Bumpers, Grille, Side Mirrors, Tail Lights (7 pc)
This Kit was designed by a collaboration of multiple designers. While the kit has a lot of custom design, many modifications can still be made to personalize the kit as you see fit.
The body sits ~1MM from the floor. The stock interior was not modified or raised in any way, but a “Scale Model Addicts” club plaque was also included to mount at the rear view window.
The Bed Pan Exit Exhaust runs through the custom frame, and twists above the differential before exiting through the pan, if you choose to install it.
Beneath the custom bed pan you’ll find the fuel cell, batteries, air compressors and everything else needed to build a nice truck like this.
This full kit is considered a PRINT-TO-ORDER item. Due to this Kit being in the final stages of development, the handling time is 30 days. This will ensure that you receive a high quality kit as well as instructions to build the kit as easily as possible.
Our goal at Scale Model Addicts is to make rare or uncommon model kits available to the public. When we bring out a kit, we make it print-to-order so that we don’t have to limit the amount of kits or the amount of time we can carry it.
The more purchases you make of this kit, the further you are funding the creation of new unique kits for the slammed and lifted community. While we don’t take design requests, we do take suggestions! Throw us some ideas in a message here on eBay or on Instagram @ScaleModelAddicts anytime!
The price of the kit reflects the time and effort it has taken to design this kit, print individually, and provide the best customer experience to all model builders.
Please reach out if you have any questions!
You won’t find this kit anywhere else!
This kit has been made available to order by popular demand. Because this was not planned, the kit is still in Print-To-Order status.
Returns Accepted for this item if it's within 14 Days
Price type
IN STOCK
OUT STOCK
.
